About this item

• 💁‍♀️【Tip】The controller kit can both work under 12V & 24V voltages. But the connectors are 12V JST male and female,which can't be connected to the VST lighting 24V driver.If you want to connect a 24V light, you have to cut the connector and change to JST DC24V connectors. Before application, you need to finish code matching. Press the code matching button with the pin within 15 seconds when powered on to check the code, and after the TS14 is paired with WL01, the light will flash twice. Not applicable
• 🏳️‍🌈【Smart Design】Short touch for on/off function, long touch for dimming function, Dimming range: 10-100% . if you keep touching for about 30 seconds, the dimmer can not be operated, Remove your finger, then touch the surface, and then re-operate. its maximum controlling distance is within 10 meters
• 🏳️‍🌈【Programmable and Expandable】8 wireless touch switches can be controlled by 1 wireless receiver. When matching the code, you need to disconnect the receiver power supply each time, and after the code is on, one by one. If the 9th controller is matched, 1 of the 8 wireless switches matched codes will be squeezed out; it won't work, and the program IC only has a capacity of 8 codes. It is also possible to control 8 receivers with 1 wireless switch, and the operation is the same as above.
• 🏳️‍🌈【Anti-fool design】2.4G wireless receiver: Though 12V/24V positive and negative polarity are reversed connection, it won't burn the product, and its function is still normal after the correct polarity
• 🏳️‍🌈【Reliable and Warranty】Provide 3-year quality warranty and friendly 24-hour customer service.If you have any questions, please contact us first. We will try our best to help you.