Elevate your home’s ambiance with VST’s TS23 (brightness) and TS24 (CCT/brightness) wireless switches—smart devices engineered to deliver effortless, intuitive lighting control. But before you dive into customizing brightness levels or tweaking color temperatures, there’s one crucial step: pairing your VST switches with their receivers.
This guide streamlines the process, showing you how to pair and unpair your VST devices in seconds. Let’s get started.
Understanding Your Devices
Before diving into the pairing and unpairing process, it's crucial to understand the capabilities of your devices:
-
TS23 Wireless Switch: This device allows you to adjust the brightness of your lights across four separate channels. Each channel can be paired with a different receiver, enabling independent control over multiple lighting zones.
TS23+WL01-A 3V Wireless Dimmer Switch and 2.4G Wireless Controller with 4 Channels for Indoor Lighting – VST Lighting (vstledstore.com)
-
TS24 Wireless Switch: Offering more advanced control, the TS24 not only adjusts brightness but also lets you fine-tune the color temperature (CCT) of your lights. It supports two channels, making it ideal for settings where both warmth and coolness of light are important.
TS24 Remote Switch and WL05-B Signal Receiver – VST Lighting (vstledstore.com)
Pairing Your Devices
Pairing your remote control with the corresponding receiver is the first step towards enjoying the convenience of wireless lighting control. Here's how to do it for both the TS23 and TS24:
-
Preparation:
- Ensure your lamp or lighting fixture is compatible with the voltage of your receiver.
- Have your remote control and receiver within close proximity.
-
Power Connection:
- Connect the receiver or power supply to the lamp.
- Turn the switch on the back of your remote control to the "ON" position.
- Power on the receiver. The lamp should illuminate, indicating it's ready for pairing.
-
Initiate Pairing:
- Within 5-10 seconds of powering on the receiver, press any button on the remote control panel.
- The lamp will flash slowly three times, confirming successful pairing.
-
Finalize Setup:
- After pairing, switch the back of your remote control back to the "OFF" position.
- You're now ready to use the remote for on/off operations, dimming, and, in the case of TS24, color temperature adjustments.
Unpairing (Clearing) Your Devices
Should you need to unpair a device—perhaps to reconfigure your setup or replace a faulty component—follow these steps:
-
Power Down:
- Disconnect the power supply to the receiver.
- Wait for 5-8 seconds to ensure the system resets.
-
Prepare for Unpairing:
- Turn the switch on the back of your remote control to the "ON" position.
- Press and hold the corresponding button area on the remote (even if it doesn't have a physical button there; this is a preparatory step).
-
Initiate Unpairing:
- Reconnect the power to the receiver.
- The lamp will flash quickly six times, indicating successful unpairing.
Key Considerations
- Switch Functionality: Remember, the switch on the back of your remote serves dual purposes: "ON" for pairing/unpairing and "OFF" for regular operation.
- Power Resilience: Once paired, your devices maintain their connection even after power cycles or battery replacements, eliminating the need for repeated setups.
- Channel Management: The TS23 supports pairing with up to four receivers, each on a separate channel. Conversely, the TS24 is limited to two channels, ensuring focused control where needed.
Conclusion
Mastering the pairing and unpairing of your TS23 and TS24 wireless switches empowers you to tailor your lighting environment with precision and ease. Whether you're creating ambiance for a special occasion or optimizing your workspace for productivity, these devices offer the flexibility and control you need. By following the simple steps outlined in this guide, you'll be well on your way to enjoying a smarter, more responsive lighting system. Happy lighting!